E80W GbS Spare Parts

One silicone and metal flapper set for E80S, E80S GbW and E80W GbS espresso grinders

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

For the E80S, E80S GbW and E80W GbS espresso grinders. Material: hardened special steel Diameter: 80mm Finish: glass bead blasted for optimal debur...

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on the E80S, E80S GbW and E80W GbS espresso grinders

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

For the PEAK, E80S, E80S GbW and E80W GbS espresso grinders. Also compatible with Ditting 804 Lab Sweet, Ditting 807 Lab Sweet and Ditting PEAK esp...

Load cell for E65S GbW, E80S GbW and E80W GbS espresso grinders

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

4 piece set of rubber feet for X54 Allround Home, E65S, E65S GbW, E80S, E80S GbW and E80W GbS coffee grinders

Spout pipe for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Complete bean hopper with 1200 gram capacity for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders Old article number: 700610

Complete bean hopper with 1800 gram capacity for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Grinder top cover adapter set for E80S, E80S GbW and E80W GbS espresso grinders. To install, mount the pins with a hammer through the holes, the no...

Spout angle adjustment guidance for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Drip tray for E80S GbW and E80W GbS espresso grinders

Single grinder top cover seal ring adapter for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Ten piece set of foam non-slip pads for base plates on E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Pack of 10 grinder top cover seal ring adapters for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders

Circuit breaker with 100V for the E65S, E65S GbW, E80S, E80S GbW, E80W GbS, K30 and PEAK espresso grinders

Load cell cover for E80S GbW and E80W GbS espresso grinders

Portafilter support for E65S GbW, E80S GbW and E80W GbS espresso grinders

Fan with 790mm cable length for E80S, E80S GbW and E80W GbS espresso grinders

Capacitor with 80µF, 100-127V for the E80S, E80S GbW and E80W GbS espresso grinders

Housing base plate for the E80S, E80S GbW and E80W GbS espresso grinders

Fan with cable for E65S GbW, E80S GbW and E80W GbS espresso grinder

Rotary burr carrier for E80S, E80S GbW and E80W GbS espresso grinders

Housing side panel set in matte white for E80S, E80S GbW and E80W GbS espresso grinders

Complete set with display hard key, push buttons and springs for E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders Old article number: 701046

Intermediate plate set for the E80W GbS espresso grinder

Grind size adjustment ring for the E80W GbS espresso grinder

Unlocking lever and sliding pins set for the grind size adjustment ring on the E80W GbS espresso grinder

Interlock switch set for the E80W GbS espresso grinder

Grinder top cover for the E80W GbS espresso grinder

Display control unit for the E80W GbS espresso grinder

Spout angle adjustment lever for E65S, E65S GbW, E80S, E80S GbW and E80W GbS espresso grinders